Titanium Spa Heaters
| 100% Efficient | 100% Submerged in Water | 100% Warranted |
|
Patented and Patents Pending O-Ring Seal, No Bulkheads 5-Year Warranty |
 |
11kW for fast heat recovery For longevity, 81.67 watt density for each 5.5kW heater |
| Claims no spa assembler can make... ! | ||
Description
Reliable and Energy Efficient Spa Heating Technology
In hot tubs and spas the electrical spa heater is the most important component and the
most problematic. The materials that construct the hot tub heater must be carefully selected to
resist corrosion,
prevent 'dry-fire'
and heat efficiently.
Regal Spas has engineered effective and proven solutions:
1 - Resist Corrosion
In our patented and patents pending spa heater we eliminated all materials that will rust or fail in spa water environment.
Our heater is constructed with no bulkheads, no welds and no epoxy.
2 - Prevent 'Dry-Fire'
It is commonly known that air trapped in the heater chamber will burn the heater. Our patented
Automatic Air Bleeder is installed on the heater manifold and allows the air to escape from the
heater chamber providing an effective solution to dry fire heaters.
3 - Heat Efficiently
Only single sheath submersible electric heaters are 100% efficient. In addition, on all
hot tubs and spas, when the spa heater is 'On' the spa pump must also be 'On'.
At Regal Spas we "kill 2 birds with 1 stone." Our 11kW spa heater provides
faster heat recovery and cuts down on low pump energy consumption.
Our patented and patents pending Spa Heater along with our patented Automatic Air Bleeder and our patent pending
Motor Cooler are engineered to extend the life of our spas.
Remember, if the spa pump is not running the energy consumption is $0!